Last updated: June 5, 2026 · By Anna Katherine Page
This post contains affiliate links. If you buy through them I may earn a small commission, at no extra cost to you. I only recommend products I actually use.
Quick answer: A simple thrifted desk makeover with no paint at all. I picked up a vintage wood desk at a thrift store for $25, cleaned it with Murphy’s Oil Soap, conditioned it with Old English wood oil that has a touch of stain, and sealed it with SC Johnson paste wax. Three easy steps, and the original character of the piece stayed intact.
This thrifted desk makeover started with a $25 score at the thrift store and ended with a piece I love a hundred times more than anything I could have bought new. The whole project uses just three products, no paint, and protects what makes vintage wood furniture special: its grain, color, and the little quirks that come from a piece having a life before you.
Vintage wood desks at thrift stores are some of the best values you can find. Real solid wood, joinery that has already proven itself, and prices a fraction of what you would pay for a comparable new piece. A thrifted desk makeover takes that bargain and turns it into a piece you actually love, often without changing its character at all. You are not building from scratch, you are coaxing what is already good back to the surface.
What you will need for the thrifted desk makeover
Murphy’s Oil Soap. A gentle wood cleaner that lifts grime without stripping the finish. (Find it on Amazon)
Old English wood oil with stain. Conditions dried-out wood and adds a touch of color where it needs it. (Find it on Amazon)
SC Johnson paste wax. Seals and protects with a soft, low-sheen finish. (Find it on Amazon)
Soft cloths or microfiber rags for applying each product.
How to refinish a thrifted wood desk in 3 easy steps
Clean with Murphy’s Oil Soap. Mix according to the bottle directions, dampen a soft cloth, and work it across the whole desk to lift years of grime. Wipe down with a clean damp cloth and let the wood fully dry.
Condition with Old English wood oil. Apply a thin coat of the wood oil with stain, following the grain, and let it soak in. The oil rehydrates dried-out wood and the touch of stain evens out faded or worn spots without covering the grain.
Seal with SC Johnson paste wax. Once the oil has set, rub on a thin layer of paste wax with a clean cloth, then buff to a soft sheen. This protects the surface and gives it a finish that feels like real wood instead of plastic.
That is the entire thrifted desk makeover: clean, condition, seal. No sanding, no painting, no power tools.
Keeping the original character details
One of the best things about this desk: it had a few original smiley faces carved into it from whoever owned it before. I left them in. A thrifted desk makeover is at its best when you protect the parts that make the piece unique, not erase them. Carvings, original hardware, color variations, the patina on the edges. Those are the details that make a vintage piece feel intentional in a room, not like another mass-produced board.
Why oil and wax instead of paint
Painting a wood desk is fast and dramatic, and there is a time for it (I have done plenty of painted furniture projects too). But on a beautiful piece of real wood, paint covers exactly what makes it valuable. Oil and wax do the opposite. They feed the wood, deepen its color, and protect it without hiding the grain. For a vintage thrifted desk with character, this approach almost always reads better.
Key takeaways
This thrifted desk makeover took three products and three steps.
Clean with Murphy’s Oil Soap, condition with Old English wood oil with stain, seal with paste wax.
No paint, no sanding, no covering up the wood grain.
Original details like carvings and hardware stay intact and add character.
Frequently asked questions
How long does a thrifted desk makeover like this take?
About an afternoon. Cleaning and oil application is the bulk of the time, with drying built in. The paste wax goes on quickly and buffs out in minutes.
Do I need to sand the desk first?
Not for this approach. If the existing finish is intact and the desk just needs cleaning and conditioning, sanding would strip the patina you are trying to keep. Only sand if you are dealing with damaged or peeling finish.
What does Murphy’s Oil Soap actually do?
It is a gentle wood-safe cleaner that lifts dirt, grease, and grime without stripping the existing finish. Perfect first step for any thrifted wood furniture project.
Can I use this method on other wood furniture?
Yes. Any vintage wood piece you want to preserve without painting works with the same three steps. Side tables, dressers, dining chairs, headboards.
How often do I need to rewax the desk?
Once a year is plenty for most pieces. A quick buff with a soft cloth refreshes the finish between waxings.
Is this thrifted desk makeover beginner friendly?
Yes. There are no power tools, no sanding, and the worst case if you over-apply oil or wax is just wiping it back. This is one of the easiest finishes to get right.
About Anna Katherine
I refresh thrifted furniture and home decor on a budget and share the real, hands-on process. Follow along for honest DIY projects and the small techniques that make them look professional, on TikTok and YouTube.
Watch the original makeover and more thrift flips on TikTok.
Last updated: June 5, 2026 · By Anna Katherine Page
This post contains affiliate links. If you buy through them I may earn a small commission, at no extra cost to you. I only recommend products I actually use.
Quick answer: Here is the full Jenny Lind high chair makeover, the multi-year story of one piece. I bought this vintage 1980s chair at a thrift store for $10, painted it black to match my kitchen, then stored it in the barn for years. Recently I refinished it in white to use as a styled rental piece for my event business. This is the full multi-year makeover, paint and all.
Some pieces of furniture have more than one life in them. This vintage Jenny Lind high chair has had at least three. It started as a $10 thrift store gamble, became a black statement piece in my kitchen, sat forgotten in a barn, and is now a freshly painted rental item for first birthday parties. Here is the whole story, and how I refinished it each time.
Years ago I spotted a vintage 1980s Jenny Lind high chair at a thrift store and brought it home for just $10. A Jenny Lind is the classic style with the rows of decorative spindle turnings, and they have a timeless, slightly old-fashioned charm that is hard to find in modern furniture. At $10 it was an easy yes. I documented that very first flip on the blog back then: you can read the original Vintage 1980s Jenny Lind highchair furniture flip, and I filmed it in two parts on YouTube, Part 1 and Part 2.
Round one: painting it black
At the time, my kitchen was leaning moody and dark, so I painted the high chair black to match that vibe. It worked beautifully for that season of my home. That is the honest truth about decorating: your taste shifts, and a piece that was perfect one year can feel off the next. The high chair earned its spot for a while, then slowly stopped fitting the space.
Round one: the high chair painted black for a moodier kitchen.
Then it sat in the barn
When my style moved on, the high chair did what a lot of good furniture does. It went out to the barn for storage. It was too charming to give away and too out of step with the house to keep inside. So it waited. For a few years it was just a black vintage high chair under a dust sheet, holding its potential.
Round two: bringing it back in white
This spring it finally got its third life. I am building an event rental business, and a vintage high chair is exactly the kind of charming, photogenic piece families want for a first birthday celebration. So I pulled it out of the barn and refinished it, this time in a soft white to suit a styled party setup.
Here is how it turned out: the same $10 thrift store frame, the same charming spindles, now in a fresh white that photographs beautifully against any party backdrop.
The finished high chair in soft white, styled for a first birthday celebration.
Renting it out through Keowee Event Co
The high chair now lives a working life as a rental piece with Keowee Event Co, my event rental business. We rent backyard games and styled pieces that make gatherings feel special across Oconee and Pickens County, South Carolina. A vintage high chair is a perfect example of the kind of charming, photo-ready detail that turns an ordinary first birthday into something memorable, and giving an old piece a new purpose is exactly the point.
The high chair with a vintage rocking horse, both refinished as event rental pieces.
Pin this Jenny Lind high chair makeover
Saving this for your own thrift flip? Here are the pins from the project.
Key takeaways
A $10 thrifted vintage high chair has been refinished twice over several years.
Round one was black to match a moody kitchen; round two is white for event rentals.
The white refinish took three cans of satin spray paint applied in thin coats.
Old furniture is worth keeping. Its next purpose may just be a paint job away.
Frequently asked questions
What is a Jenny Lind high chair?
A Jenny Lind is a classic style of wooden high chair recognizable by its rows of decorative spindle turnings. The look has been made for generations, and vintage versions like this 1980s one are popular for their old-fashioned charm.
Can you repaint furniture that is already painted?
Yes. You can paint over an existing finish. Clean the piece well, give it a light scuff sand so the new paint grips, and then apply your paint in thin, even coats. This high chair went from raw wood to black to white over its life.
What kind of paint should you use on a wooden high chair?
A satin-finish spray paint works well on a spindled piece like this because it reaches into the turnings evenly. I used a satin enamel spray paint and built the color up with several light coats.
How much does it cost to flip a thrifted high chair?
This one cost $10 at the thrift store. The white refinish added three cans of spray paint, so the whole project stayed inexpensive, which is part of what makes thrift flips so satisfying.
How do you get a smooth finish when spray painting furniture?
Warm the can, shake it well, and use short sweeping strokes that start and end past the edges, building thin coats. The full method is in my spray paint tips guide.
Where can you rent vintage event pieces in Upstate South Carolina?
Keowee Event Co rents backyard games and styled event pieces, including this high chair, across Oconee and Pickens County, South Carolina.
About Anna Katherine
I refresh thrifted furniture, document real makeovers, and run Keowee Event Co, an event rental business in Upstate South Carolina. Follow the flips and the building of the business on TikTok and YouTube.
Follow the makeovers and the rental business on TikTok, or see what we rent at Keowee Event Co.
Last updated: June 5, 2026 · By Anna Katherine Page
This post contains affiliate links. If you buy through them I may earn a small commission, at no extra cost to you. I only recommend products I actually use.
Quick answer: Here are the spray paint tips that matter most: warm the can in water before you start, shake it well, and apply the paint in short, light, sweeping strokes that begin and end past the edges of your object. Thin coats beat thick ones every single time.
If your spray paint projects come out drippy, splattered, or uneven, the problem usually is not the paint. It is the prep and the technique. I have spray painted a lot of thrifted furniture, and the difference between a blotchy finish and a smooth, professional one comes down to a handful of small habits. Here are the spray paint tips I use on every project.
A bit of context: I filmed these tips while repainting a vintage 1980s Jenny Lind high chair, refinishing it from black back to white to use as a rental piece for my event rental business. If you want the full backstory, I wrote up the whole Jenny Lind high chair makeover separately.
Most uneven finishes trace back to two mistakes: paint that is too thick or unevenly mixed, and a spraying motion that lingers too long in one spot. When you hold the can still over one area, paint pools and runs. When the paint itself is cold or poorly shaken, it sprays in a rough, spattered pattern. Fix those two things and the finish takes care of itself.
A spray paint trigger handle. This clips onto the can and makes your strokes far steadier. I use the Rust-Oleum Comfort Grip trigger.
A drop cloth and a well-ventilated space.
The two tools that do the heavy lifting: Rust-Oleum satin spray paint and the Comfort Grip trigger.
Spray paint tips: how to get a smooth finish, step by step
Warm the can in water. Set the can in a bucket of warm water for about 60 seconds. This brings the paint to a smoother, more even consistency before it ever leaves the nozzle. Use warm water only, never hot, and never heat an aerosol can any other way.
Attach a trigger handle. Clip the trigger attachment onto the top of the can, lined up centered so it snaps on properly. A trigger gives you far more control than pressing the tip with one finger.
Shake well. Shake the can for a good 30 seconds so the paint is fully mixed.
Start your stroke past the object. Begin spraying just off to the side of your object, not directly on it. Starting straight on the piece leaves an uneven, splattered patch where the spray first bursts out.
Use short, smooth, sweeping strokes. Move the can in short, consistent passes. Never hold it in one spot. Keep the motion light and steady all the way across.
Finish past the object too. Carry each stroke all the way off the far edge before you release. Start past it, end past it. That is what keeps the coat even from edge to edge.
Build up thin coats. Apply one light coat, then let it dry for about 30 minutes to an hour. Come back and add the next thin layer. Thin coats stacked slowly always beat one thick, drippy pass.
Spray paint tips: how many coats do you need?
It depends on the color and the surface, but plan on several thin coats rather than two heavy ones. On my high chair project I used three full cans of satin white to reach a clean, even finish. Keep adding light layers until the color looks solid and consistent, letting each one dry in between. Manufacturers agree on the light-coat approach: Krylon notes that most aerosol spray paints are dry to the touch in roughly 20 to 25 minutes and ready to handle in about an hour.
Mistakes to avoid
Spraying a cold, under-shaken can. Warm it, shake it, then spray.
Holding the can in one place. This is the number one cause of drips and runs.
Starting or stopping your stroke on the object. Always begin and end past the edges.
Loading on thick coats to save time. Thick coats stay tacky, sag, and ruin the finish.
Painting in high humidity. Damp air slows drying and can cloud the finish.
Key takeaways
Warm the can in water and shake it for 30 seconds before spraying.
A trigger handle gives you steadier, smoother strokes.
Start and finish every stroke past the edges of the object.
Build the finish with several thin coats, drying 30 to 60 minutes between each.
Frequently asked questions
Why should you put spray paint in warm water?
Warming the can for about a minute brings the paint to a smoother consistency, so it sprays more evenly and is less likely to spatter. Use warm water, never hot, and never heat an aerosol can directly.
How long should spray paint dry between coats?
About 30 minutes to an hour for a light coat. Manufacturer guidance from Krylon puts most aerosol paints at dry to the touch in 20 to 25 minutes, but drying time varies with paint and humidity, so check the can before recoating.
How do you avoid drips when spray painting?
Keep the can moving in short sweeping strokes, never pausing in one spot, and apply thin coats. Drips happen when paint pools, which is caused by lingering too long or spraying too heavily.
Do you really need a spray paint trigger handle?
It is not required, but it makes a real difference. A trigger steadies your hand, reduces finger fatigue, and helps you keep an even, consistent stroke across the whole piece.
What temperature should you spray paint in?
Aim for a mild, dry day, roughly 65 to 85 degrees with low humidity. Cold air and damp conditions both slow drying and can leave a rough or cloudy finish.
Why is my spray paint coming out rough or spotty?
The usual causes are a cold or under-shaken can, holding the can too long in one area, or spraying in high humidity. Warm the can, shake it well, and keep your strokes light and moving.
About Anna Katherine
I refresh thrifted furniture and home decor on a budget and share the real, hands-on process. Follow along for honest DIY projects and the small techniques that make them look professional, on TikTok and YouTube.
Want to see these strokes in action? Watch on TikTok, or replay the YouTube Short above.
